Tag Archives: Kona

19 Jan

Moda BOM Blocks 9-11

Hello! As promised here are our handy tips for blocks 9-11 for those of you participating in our Moda Building Blocks BOM.

Firstly, as always, once I have cut the required fabrics as per each block pattern I lay out the block.

Block 9 layout

For some bizarre reason I really struggled with how I was going to sew the corners on this block! In my mind and please don’t ask me why, I only had one white triangle per corner not two, it wasn’t until I laid the block out and saw that there were two white triangles per corner did the penny drop!

Corner layout!

Once you have sewn each of the four corners it is time to sew your rows together. As you would with any quilt block piece left to right making sure all your seams and points match up where necessary.

top row pieced

Once all three rows in the block are pieced and pressed well you can go ahead and sew the rows together to complete your block!

block 9 finished!

Once I had gotten over the ridiculous non-existent hurdle with the corners of this block I found it came together easily!

Now we’ll look at Block 10 which I’ve got to admit is my favourite of this months blocks! Again once all the required pieces have been cut, and please don’t forget to use a spray starch like Best Press or Flatter to help your fabrics maintain their shape and be crease free, layout the block.

Block 10 layout

Even though the layout here is not neat I can still see all the different elements that make up the block which in turn makes it easier to sew in a practical order.

Block 10 top row

The top row is made up of three elements that were simple enough to sew, the corners are very similar to block 9. The flying geese section in the middle is easy but I do have a couple of tips to help you on your way!

Instead of pinning all the bias cut triangles in these blocks I’ve been using a dab of my Sewline Glue Pen to secure them together. I worry that the use of pins will distort and stretch the fabric (because they are cut on the bias) and this will throw the block size out.

Fying Geese

Here you can see how I have lined the triangles up to sew them. The overlap of fabric between the two triangles needs to be at the centre point of the peach fabric, this ensures that when you have sewn the other triangle on at the opposite side the point is sharp in the middle. I used a dab of glue to hold the triangles in place along the edge I would be sewing.

Once I had pieced the top and bottom rows which are the same, I tackled the centre section of the block.

layout of block centre

In order to line the triangles up correctly on each side of the square I found the centre point of the side of the square and of the triangle and made a crease on each which I then lined up. Again I secured the two pieces with a dab of glue from my Sewline pen.

match up the creases before sewing!

I repeated this process until all four white triangles had been attached to the four sides of the square. I used the same method of finding and aligning the centres when I sewed on the outer triangles too.

block 10 complete

I love the colours in this block, they really pop!

Next up is Block 11 which is easily pieced compared to blocks 9 and 10! You’re simply sewing the strips of fabric together as the pattern indicates. Sew the 3 longer strips together of the centre section first and then sew the shorter strips into pairs, making sure the two shades of yellow are in the correct order as per the pattern!

block 11 pieced

The only tip I have for this part is to save you some maths!! The shorter strips need to be sewn 4″ in from the edge at the top and bottom to give the block as above. This is now ready for you to cut.

**** final part of instructions will be added as soon as I have got the photos edited!***

7 Jan

Moda BOM

Hi and welcome to only the second edition to our Moda BOM blog posts. Firstly let me apologise for not keeping up to the posts as we have posted out the monthly blocks. I aiming to get back on track for you as soon as possible.

In the meantime the lovely Jules (aka @Juleskerry_s) stepped in to give us a run down on the latest block she made with some helpful guidance for us all.

Without further ado over to Jules -

I would like to talk a little about Kona solids before I start. These are beautiful fabrics and they make fabulous quilts. The colours are stunning. The fabrics are a little heavier than what you may be used to. They tend to frey and once they are cut on the bias (diagonally) they stretch very easily. Once I have my pieces cut out, I handle them as little as possible.

I use a quilting needle for my machine, a size 75, as these needles have a sharper point (the universal needles have a more rounded point). These needles go through the fabric much easier.

I use a 1/4 inch foot with guide, flatter when pressing (not ironing-this stretches the material), this really gets those creases out. I press one colour at a time, cut it and put it to one side, then go through all the colours to make the block. I also use Aurifil threads.

I am starting with block 8 as I have photographs to show how I
assembled the blocks. I didn’t take photos of the other blocks but I’m hoping this will show you how to construct them using the pattern.

Cut out all your fabrics using the Block cutting guide at the bottom of the pattern. Where you have a square to cut diagonally, pick those pieces up carefully not to stretch them, and then put them to one side. When you cut a square diagonally twice, place the square on point, cut top to bottom and carefully pick the ruler up and cut right to left. This stops you handling the fabric too much.

When you have all your pieces cut out, place the pieces on your mat to match the picture.

Stand back and check theses are correct. If you are not sewing them straight away put your ruler on top so they can’t be moved. (I use my big 20″ square ruler). Pick pieces up, stitch and put them back down in the same place, this way they won’t get stitched the wrong way.

Making up your flying geese using one B and two C pieces. Match your first side of C with B, the top will be slightly over, this is okay.

Stitch a 1/4″ seam, press seam to set the press over to the dark side and trim.

Line the other C on the opposite side, stitch and repeat.

Do this with the remaining B & C blocks to give you 16 flying geese.

To prepare to attach D piece to your flying geese, fold in half one flying geese unit, pressing with your finger, this will show when opened.

Repeat with D piece.

Lay this on top of the flying geese unit, matching up the creases, sew in place. Set the seam then press open and trim.

Once you have the four flying geese unit together with the D piece on top we need to attach the E piece (orange triangle). See pic for placing.

Stitch, then attach the other triangle E to the other side. Repeat with one other set of four geese & D.

The centre of the block is one centre square A, two lots of four flying geese and two D’s.

Joining the sides to the centre, butt your seams together (see pic) put a pin in to secure. When sewing remove pin, don’t sew over the top it.

And there you have your final block

I’d just like to say thanks again to Jules.

We will be working hard to put up pointers and tips for the remaining blocks and get these posts up to date for you all. We’d love to have a finished quilt top at the end of the year and see yours too.

So here are the other BLOCKS from Jules with posts to follow…

Block 2

Block 3

Block 4

Block 5

Block 6

13 Oct

Moda BOM Block 1

Hello and welcome to all our lovely followers of the Moda BOM quilt.

Sorry this post is a little late, but hopefully it may have some hints and tips for those of you that haven’t yet cut into your stash.

I’ll start by saying that I am no block girl myself. I came into quilting from bag making and have done quite a few quilts but none of them I would say are traditional blocks which use some of the basic techniques, so I thought it would be a great test for me to try and figure out the patterns in order to try and help the ones of us that are a bit unsure of flying geese and half square triangles (HST) etc.

The one thing I found difficult was knowing if my measurements were correct as the block was building up. As it turned out I had made an error on my second stage of the block and it threw the whole block out. So a bit of seam ripping later and I think this turned out to be an almost perfect block (apart from 1 point which I’m going to re-do).

First up, cutting. As the centre of this block is made up of quite small pieces, I would definitely recommend pressing and starching your red and white fabrics. Our favourite partner in crime for this job is Flatter, I just love the smell and the way it holds the fabric but obviously you can use whatever you have to make sure your fabric is going to be as crisp as possible to help hold its shape.

The only tricky part I found in the cutting was G the 19 1/4″ square into 4. Even though I have a 24″ ruler it wouldn’t reach point to point. I placed the square on the mat so it fell on the cutting line from corner to corner and then folded the the block in half like so:

Making cutting it in half easier, I placed my ruler on that diagonal line and made my first cut. I then unfolded the triangles swirled them round so they were in this same position (placing one on top of the other) and making just one more cut along that same diagonal line.

Another tip here would be to label all you pieces once they are cut.

Piecing

All the seams are sewn at a 1/4″ so this will not be repeated through the post.

Take block A and four B. Start by folding A in half to give you a centre line (folding straight edge to edge). Now put one B so it is point is lined up with this centre fold and the long edge runs parallel to the top of the square, sew along this seam.

Press the stitches then fold back and press. I would recommend folding the seam towards B.

Repeat with the opposite side,

and then the remaining two sides, pressing as you go. You can now trim the edges.

The next row we are going to start on the flying geese, (this is where I went majorly wrong the first time around, not thinking straight).

Take a C and two B’s. Lay triangle C down as show in the picture and lay a B on top matching the long edge to the side of C. Sew along this edge press. You will have a slight overhang at the top point, don’t worry that is correct.

Repeat with second red B to give you your flying geese.

Repeat this step with your remaining 3 C blocks and 6 B’s.

Take 4 D’s and the last 4 B’s. These will make up the four corner HST pieces. Place B on top of D matching all side perfectly and sew down the long edge. Press towards B. Repeat with last 3.

All your red and white pieces should now look like this ready to sew together:

Take two of the geese and place on opposite sides of your main block and sew in place. Press seams.

Take the four HST and sew two to each end of the other two geese, making sure you position them correctly.

Now sew these strips to either side of your block and your centre block is now done, and can be trimmed.

Moving onto Seafoam and take one E and place it along the edge of your block, centring in the same way we did with the very first piece. Add the opposite piece and then the last two side, pressing as you go. Your block will now look like this:

We’re on the home straight now and the blocks are getting much bigger.

Take one G and two F’s and again you are making a flying geese in exactly the same way as with C & B.

I wanted my seams to all lay the same way so I attached the right side F to G first.

Repeat this step 3 more times.

Attach a H block to either end of two of these geese.

Now in exactly the same way with the red and white centre block, sew the two of your flying geese (with now H blocks) to opposite sides of your main block and press. Then add your last two rows (flying geese with H blocks on the ends). Matching the seams as you go to give you nice points in the corners.

And you’re done:

Hope you all have an easier time than I did first time around, but it was a great learning process and I hope I can help answer any questions you have. If I’ve not covered anything in the post just give us a shout, here or on any of our social media outlets!